Fassa Mikros 001 - 12 ltr

£89.95 excl.VAT
£107.94 incl.VAT
Shipping calculated at checkout.

Fassa MIKROS 001 is used as a primer for interior and exterior walls, before applying finish coat products. The ultra-fine polymeric particles ensure excellent penetration and impregnation of the substrate. MIKROS 001 reduces substrate absorption and makes absorption more uniform, simplifying application and improving colour uniformity in the subsequent finish coats.

Substrate Preparation

For new walls, before applying the MIKROS 001 primer, wait at least 28 days after completion of the surface. Any traces of oil, grease, wax etc. must be removed beforehand. The substrate must be solid, dry, free of dust, dirt, etc. If covering old paint that is peeling off or applied in thick coats, remove the crumbling and loose parts by scraping/brushing.


Apply MIKROS 001 by brush or roller, making sure it covers the surface uniformly, and avoiding dripping. Number of coats: 1-2, applied when still wet. Dilution by weight in water: from 50% to 100% on absorbent substrates such as gypsum and plasterboard; from 100% to 200% on lime and lime/cement plasters; from 200% to 300% on concrete. The dilution of MIKROS 001 will vary depending on substrate type and absorption; it is always recommended to test application on the specific substrate before starting. Wait at least 4 hours before applying the finish coats.


1 x 12 ltr tub covers approx. 100 - 160m2 depending on the substrate absorption

Formula - approx. 8-14 m²/l depending on the substrate absorption

    Please Note: These estimates take no account of wastage and will vary according to the type of surface involved and method of application.


    MIKROS 001 is supplied in 12 ltr tubs. 

      Technical & Safety Datasheets

      Please follow link to Fassa Bortolo MIKROS 001 Technical datasheet.

      Please follow link to Fassa Bortolo MIKROS 001 Safety datasheet