Ecorend MR1 Monocouche One Coat Render is a high performance, cement based, through coloured scratch render. Developed to have excellent water repellence, breathability and adhesion, it is also easy to apply, by hand or by spray, in one coat. The product's through colour characteristics ensure a low maintenance, attractive, stone looking finish.
Ecorend is available is a range of 33 colours. Specifiers should consult the MR1 Colour Chart and, whenever possible, obtain samples prior to specification.
1st pass - Apply the 1st pass to approx. 8mm thick, with fibre-reinforcing mesh included in the 1st pass ensuring that the mesh is overlapped 100mm at the mesh joints
2nd pass - Applied to approx. 9mm thick, wet on wet to the 1st pass and levelled flat. Then leave the render to harden but not fully set for between 3-16 hours dependent on the temperature. This will allow the surface to harden, ready to finish once you can imprint your nail but not your thumb print, at this point the render is ready to scrape.
Properties
Highly Polymer Modified, Water Repellant, High Adhesion, Breathable, Through Coloured for Low Maintenance, Suitable for Hand or Spray Application.
Technical Data
Water Demand : Approx. 4.5 - 5 litres per 25kg bag
Application Temperature 5˚C - 25˚C for a minimum of 24 hours