Ecorend G10 - Multi Surface Primer - 20kg

£73.75 excl.VAT
£88.50 incl.VAT
Shipping calculated at checkout.
By Ecorend

Ecorend G10 is a polymer resin based primer for use on high and low suction substrates where adhesion and suction control is required.

Whether the substrate is old or new, brick or block, low or high porosity, the G10 Multi-Surface Primer does it all.  Engineered with fine particle sized polymers, G10 Primer penetrates deeps into the substrate to ensure ultra-high adhesion to multiple surfaces. It also has a sandy texture, which provides a good key for the subsequent topcoats.

G10 Multi-Surface Primer can be applied using a long pile roller or by spray, and is supplied ready-to-use for ease and speed of application.

Suitable Substrate

All types of new and old brick and block substrates


Approx. 40-60m2 per 20kg


Mix the product before use.

For low porosity substrates - Apply in one coat either by roller or spray application.

For high porosity substrates eg. lightweight blockwork - Application may require two coats. For application in two coats apply a diluted (maximum 10% with clean water) first coat of G10 Multi-Surface Primer, allow to dry, then apply an undiluted second coat.


Highly Vapour Permeable, High Adhesion, Polymer Technology, Water Based,  Roller / Spray Applied, Ready to use

Technical Data

Apply Neat

3 ̊C - 25 ̊C for a minimum of 24 hours